How to Recharge the R36s: A Complete Guide and What to Avoid

Recharging your R36s device is an essential part of keeping it ready for action, whether you're gaming, listening to music, or using it for work. Knowing how to properly recharge the R36s will not only ensure it’s always powered up when you need it but will also help prolong the life of its battery. In this blog, we’ll walk you through the steps to recharge the R36s and share some common mistakes to avoid.

Step-by-Step Guide to Recharging the R36s

Recharging your R36s is a simple process, but there are a few things to keep in mind to make sure you’re doing it right. Here’s how:

1. Find the Right Charging Cable and Adapter

Always use the official charging cable and adapter that came with the R36s, or ensure you are using a compatible charger from a reputable source. Using the wrong cable or adapter can result in slower charging, overheating, or even damage to the device. If you’re unsure, consult the product manual for the recommended charging accessories.

2. Plug in the Charging Cable

Locate the charging port on the R36s, which is typically at the side or bottom of the device. Insert the charging cable into the port and connect the other end to a power source. For faster charging, it’s recommended to plug the device into a wall outlet using an adapter. Charging from a USB port on your computer can be slower.

3. Monitor the Charging Indicators

Once connected, monitor the LED light indicators or battery icon to ensure the device is charging. Typically, a red light will indicate that the R36s is in the process of charging, and once fully charged, the light will turn green or blue (depending on the model). You may also see a full battery icon on the display if the device has one.

4. Allow the Device to Fully Charge

Let the R36s charge uninterrupted until the battery reaches 100%. While modern devices are designed to stop charging once full, it’s still a good practice to let it charge completely for optimal battery performance. Typically, the R36s will take around 2-3 hours to fully charge, depending on factors like power source and battery level.

What to Avoid While Recharging Your R36s

To ensure that your R36s stays in top shape, there are several things you should avoid while recharging:

1. Avoid Using Low-Quality Chargers

While it might be tempting to use any available charging cable or adapter, low-quality or incompatible chargers can damage your device. Always use the recommended accessories to avoid issues like overheating, slow charging, or short circuits.

2. Don’t Overcharge the Device

Modern devices like the R36s are designed with overcharge protection, so they typically stop drawing power once the battery is full. However, leaving it plugged in for extended periods after charging can cause long-term battery degradation. If possible, unplug the device when it reaches 100%.

3. Avoid Charging in Hot Environments

Charging the R36s in a hot environment can cause the device to overheat and may lead to battery damage. Make sure to charge the device in a cool area, away from direct sunlight, heaters, or any source of heat. Excess heat can also slow down the charging process.

4. Don’t Use the Device While Charging (If You Can Avoid It)

While it’s okay to use the R36s while charging occasionally, doing so frequently can lead to slower charging times. It also increases the heat generated during charging, which can negatively impact battery health over time. To speed up the process and avoid unnecessary stress on the battery, it’s best to refrain from using the device until it’s fully charged.

5. Avoid Charging With Damaged Cables

If your charging cable is frayed, bent, or otherwise damaged, it’s best to stop using it immediately. Damaged cables can cause the device to charge improperly or not at all. Always inspect your cables regularly to ensure they are in good working condition.

6. Don’t Let the Battery Completely Drain Regularly

While it’s okay for the R36s to occasionally run out of power, letting the battery completely drain to 0% before charging on a regular basis can degrade the overall lifespan of the battery. Try to recharge the device when the battery drops to around 20-30% to keep it in healthy condition.

Additional Tips for Optimal Battery Care

• Keep Your Charging Port Clean: Dust and dirt can build up in the charging port, making it difficult for the cable to connect properly. Clean the port gently with a soft cloth or compressed air if needed.
• Use the Device at Lower Brightness: If the R36s has a screen, using it at lower brightness levels can reduce power consumption and extend battery life.
• Turn Off Unnecessary Features: Turn off any features (such as Bluetooth, Wi-Fi, or other settings) that you don’t need while charging to help the device charge more efficiently.

Conclusion

Recharging the R36s is a straightforward process, but following the right steps and avoiding common mistakes can help ensure you’re getting the most out of its battery life. By using the correct charger, monitoring the charging status, and taking steps to care for the battery, you can keep your device running at its best for longer.

For more product information, tips, and accessories, visit us at youweitrade.com.