How to shut down R36S?

To properly shut down your R36S handheld console, follow these steps:

Standard Shut Down Procedure:

1. Press the Power Button:

   • Locate the power button on your R36S. It’s usually at the top or side of the device.

2. Press and Hold:

   • Press and hold the power button for a few seconds (typically 3-5 seconds). This will prompt the system to show a shutdown or power options menu.

3. Select Shut Down:

   • On the screen, you should see the power menu with options like "Shut Down," "Restart," and "Sleep."
   • Select "Shut Down" from the options using the touchscreen or physical buttons (depending on your setup).

4. Confirm Shut Down (if required):

   • If prompted to confirm, select Yes or OK to proceed with turning off the device.

5. Wait for the Device to Turn Off:

   • The system will shut down, and the screen will turn off. The device is now safely powered off.

Alternative Method (Soft Reset or Force Shutdown):

If the R36S is unresponsive or frozen and you cannot access the shutdown menu, you may need to perform a force shutdown:

1. Press and Hold the Power Button:
   • Press and hold the power button for about 10-15 seconds until the screen goes blank and the system powers off.
2. Wait for the Device to Fully Turn Off:
   • After 10-15 seconds, the device should power off completely. You can then turn it back on normally when needed.

Powering On Again:

To turn the R36S back on after shutting it down, simply press and hold the power button for a few seconds until the screen turns on.

Note:

Always make sure to shut down the device properly to avoid any data corruption or potential issues with the microSD card. If you experience any issues with shutting down or restarting, let me know, and I can help with troubleshooting!